【軟體說明】：
UpdatePack7R2 是一款用來離線更新微軟作業系統的修正整合包，讓您隨時離線修補作業系統的漏洞，避免被入侵植入後門程式或感染電腦病毒。可以安裝在任何版本(任何語言、任何位元)的 Windows 7 SP1 和 Server 2008 R2 SP1 上。包括所有版本的 Internet Explorer、所有重大、建議和安全性更新的更新。
UpdatePack7R2 有助於輕鬆地將作業系統更新到最新狀態，而不需再一個一個安裝更新可以一步到位，讓您不需在連線狀態下做離線更新。與 Windows Update 相比，顯著減少了更新所需的時間。包含用來更快速搜尋和分析更新的獨特演算法。
它可用於任何版本的 Windows 7 更新。
它支援 32 位元和 64 位元系統，更新是多國語言。
它是可擕式，可在沒有網路連接的狀態下使用。
在加入到更新修正整合包之前，所有更新都經過仔細測試和評估。
它包含所有版本的 IE 瀏覽器，包括所有語言的 IE11 的更新。
從更新修正整合包中排除不必要的更新(間諜軟體、獲取 Windows 10)。
它支援命令列選項，可以與其他腳本一起使用。
它簡化了 Windows 完全更新的過程。
使用：
系統必須在硬盤驅動器上至少有5 GB的可用空間，最好不小於1 GB的RAM。
For flexible installation set, you can use the following keys and key combinations:
Key / Reboot to automatically restart if it is required.
Key / S to completely silent install with no windows and messages. Case is significant.
Key / Silent passive installation – you can see the progress, but the installation is fully automatic.
Key / IE11 for installation of Internet Explorer 11 and its localization.
Key / Temp = allows you to specify a temporary working directory. He does not have to be empty, but must exist.
Key / NoSpace allows you to skip checking free space on the system partition is not recommended.
examples:
You want to automatically install all updates, IE11, and restart your computer: UpdatePack7R2.exe / ie11 / silent / reboot
Private need to install all the updates to existing products, the version of IE does not change, the computer does not restart: UpdatePack7R2.exe / S
The following keys are designed to integrate the updates in this distribution:
Key / WimFile = specifies the location of wim-file, you must specify an absolute path.
Key / Index = indicates an index system wim-file for each index is necessary to perform the integration again.
Key / Index = * allows you to integrate in turn updates all indexes wim-file.
Notes:
Before specifying the index is useful to execute the command: Dism / Get-WimInfo /WimFile:C:\install.wim (replace the path to your own).
Not all updates can be integrated (see table), but they do not affect the safety of the system.
examples:
Need to integrate IE11 and all updates to the index 1: UpdatePack7R2.exe / ie11 /WimFile=C:\install.wim / Index = 1
Need to integrate IE11 and all updates to all indexes: UpdatePack7R2.exe / ie11 /WimFile=C:\install.wim / Index = *
Need to integrate only the updates to existing products, do not change the version of IE: UpdatePack7R2.exe /WimFile=C:\install.wim / Index = 1
Additional Functionality
You can automatically install SP1, if it is not installed on your system. To do this, place the files Windows6.1-KB976932-X86.exe and Windows6.1-KB976932-X64.exe in the same directory with the set.
If there is a set of UpdatePack7R2Start.cmd – it will be done before installing the updates, UpdatePack7R2Finish.cmd – after installation, UpdatePack7R2Wim.cmd – after the integration of updates. By default, the console window will be displayed. To hide them, the first line in the cmd-file must begin with ": hide" (without the quotes). An update rollup monitors the exit code of cmd-file, in case you need to reboot. This code is 3010 (3010 exit command).
If you want to apply your tweaks after you install Internet Explorer 11 on a working system, locate the folder with the file set ie11.reg and it will be imported automatically.
Some keys can be replaced by the renaming of the file set. So to install IE11, you can add the word "ie11" in any place of the file name set, "-" for the automatic reboot and "++" passive installation.
examples:
You want to automatically install the system for working with IE11 and reboot: Rename UpdatePack7R2.exe in UpdatePack7R2 – ie11 ++. Exe
It is absolutely the same as using the following keys: UpdatePack7R2.exe / ie11 / silent / reboot
Notes
The size distribution (wim-file) will be increased by the size of installed updates.
Integrated update can be removed, even after installation.
It is recommended to unload from memory resident antivirus monitor for the duration of the set.
A detailed log of the updates is in the file% WinDir% \ UpdatePack7.log.
Changes in version
Added KB3212646-x86-x64 to disconnect the telemetry (replaces the KB3207752-x86-x64)
System requirements:
• Windows 7 SP1 (x86 / x64)
• Server 2008 R2 SP1
